Characteristics of coal-fired generator set

1、發電機組采用柴油發動機為動力，配套發電機。

1. The generator set is powered by diesel engine and equipped with well-known brand generator.

2、機組功率范圍廣：10~4300KW

2. Wide power range of the unit: 10 ~ 4300kw

3、低油耗、低排放、低噪音

3. Low fuel consumption, low emission and low noise

4、機組性能優良，技術，工作可靠，維護方便

4. The unit has excellent performance, advanced technology, reliable operation and convenient maintenance

5、調壓精度高，動態性能好，結構緊湊，使用壽命長

5. High voltage regulation precision, good dynamic performance, compact structure and long service life

6、濰柴產品常年進行高海拔、高溫、高寒，“三高”實驗，環境適應性強

6. Weichai products are subject to "three high" experiments at high altitude, high temperature and high cold all year round, with strong environmental adaptability

7、起動迅速、并能很快達到全功率 只需幾秒，應急1分鐘內帶到期全負荷（正常5~30MIN）停機過程短，可以頻繁起停。 8、維護操作簡單，人少，備用期間保養容易

7. It starts quickly and can quickly reach full power in only a few seconds. The shutdown process with expired full load (normal 5 ~ 30min) within 1 minute of emergency is short, and it can start and stop frequently. 8. Simple maintenance operation, few people, easy maintenance during standby

9、建設與發電的綜合成本低 10、產品分類豐富，類型上分為：船用發電機組、陸用發電機組；功能結構上分為：用途自動化機組、防雨棚機組、低噪音機組、拖車移動電站機組；行業上分為：民用發電機組、軍品發電機組、油田發電機組、電信發電機組等。

9. The comprehensive cost of construction and power generation is the lowest. 10. There are rich product categories, which are divided into marine generator set and land generator set; In terms of function and structure, it is divided into: purpose automation unit, canopy unit, low-noise unit and trailer mobile power station unit; The industry is divided into: Civil generator set, military generator set, oilfield generator set, telecom generator set, etc.

發電機組操作流程

Operation flow of generator set

1、室內氣溫低于20℃時，開啟電加熱器，對機器進行預熱。

1. When the indoor temperature is lower than 20 ℃, turn on the electric heater to preheat the machine.

2、檢查機體及周圍有無妨礙運轉的雜物，如有應及時清走。

2. Check whether there are sundries hindering the operation of the machine body and its surroundings, and remove them in time.

3、檢查曲軸箱油位、燃油箱油位、散熱器水位。如油位水位低于規定值，應補充至正常位置。

3. Check the crankcase oil level, fuel tank oil level and radiator water level. If the oil level is lower than the specified value, it shall be added to the normal position.

4、檢查燃油供油閥和冷卻水截止閥是否處于開通位置。

4. Check whether the fuel supply valve and cooling water stop valve are in the open position.

5、檢查柴油發電機組起動電動的蓄電池組電壓是否正常。

5. Check whether the battery voltage of diesel generator set starting motor is normal.

6、檢驗配電屏的試驗按鈕，觀察各報警指示燈有否接通發亮。

6. Check the test button of the distribution panel and observe whether each alarm indicator is on and on.

7、檢查配電屏各開關是否置于分閘位置，各儀表指示是否處于零位。

7. Check whether the switches of the distribution panel are in the off position and whether the indication of each instrument is in the zero position.

8、啟動進風和排風機。

8. Start the inlet and exhaust fans.

9、按動發動機的起動按鈕，使其啟動運轉。如次起動失敗，可按下配電屏上相應的復位按鈕，待其警報消除、機組回復正常狀態方可進行第二次啟動。啟動后，機器運轉聲音正常，冷卻水泵運轉指示燈亮及路儀表指示正常，啟動成功。

9. Press the start button of the engine to start it. If the first start fails, press the corresponding reset button on the distribution panel, and the second start can be carried out only after the alarm is eliminated and the unit returns to normal state. After startup, the machine operates normally, the cooling water pump operation indicator light is on and the road instrument indication is normal, and the startup is successful.

以上就是點火控制器為您提供的新資訊,更多的精彩內容請來自:http://www.dgtmcnc.com，我們后續會有更多精彩內容與您分享.

The above is the new information provided by the ignition controller. For more highlights, please come from: http://www.dgtmcnc.com , we will share more wonderful content with you later