Since the distributor less ignition system has two or more ignition coils or primary windings of ignition coils, the ignition controller generally has not only automatic power-off function, conduction angle control, constant current control and other circuits, but also cylinder discrimination circuit, multiple high-power triodes and corresponding control circuits

點火模塊又稱點火控制器，通過環境不同的要求，可選擇金屬探棒或紫外光敏管的配合使用，能夠?qū)崿F(xiàn)對自動點火，火焰指示，熄火報警，信號傳送工作自動。點火模塊具有體積小，重量輕，點火強，反應靈敏等特點，可廣泛用于各種工業對氣體或液體所產生的火焰進行監測，熄火保護。

Ignition module, also known as ignition controller, can be used with metal probe or UV photosensitive tube according to different environmental requirements, which can realize automatic ignition, flame indication, flameout alarm and signal transmission. The ignition module has the characteristics of small volume, light weight, strong ignition and sensitive response. It can be widely used in various industries to monitor and extinguish the flame generated by gas or liquid.

點火模塊通電后電源指示燈亮(綠燈)，開關在ON/OFF狀態下無上電反應，開啟開關-ON-系統自檢點火0.6秒后開啟電磁閥，檢測到有火焰信號，停止點火，工作指示燈亮(黃燈)。不著火點火時間為10秒，任意時間內熄火均可重點火，重點火期間檢測到有火焰信號則進入正常工作狀態，10秒內無火焰信號則關閉電磁閥報警指示燈亮(紅色)。使用遠傳控制功能，需外接24VDC電源輸入，通過開關的閉合實現對控制器進行開啟，關閉控制。在汽車行業點火模塊和混合集成電路（HIC）、點火開關、點火線圈、點火分電器組成點火系統。

After the ignition module is powered on, the power indicator light is on (green light), and the switch has no power on response in the on / off state. Turn on the switch - on - the system self checks the ignition, turn on the solenoid valve after 0.6 seconds, detect a flame signal, stop the ignition, and the work indicator light is on (yellow light). The ignition time without fire is 10 seconds. The key fire can be stopped at any time. If a flame signal is detected during the key fire, it will enter the normal working state. If there is no flame signal within 10 seconds, the solenoid valve will be closed and the alarm indicator light will be on (red). The remote control function requires external 24VDC power input, and the controller can be opened and closed by closing the switch. In the automotive industry, the ignition module, hybrid integrated circuit (HIC), ignition switch, ignition coil and ignition distributor constitute the ignition system.

以上就是點火控制器http://www.dgtmcnc.com為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is the ignition controller http://www.dgtmcnc.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!